4000kw Natural Gas Fuel Generating Equipment for Power Plant

• Customization: Available
• After-sales Service: O&M Oversea
• Warranty: 1year
• Model NO.: 4000GF-T
• Output Type: AC Three Phase
• Gas Source: Natural Gas
• Certification: CE, ISO, CCC
• Power: ＞200kW
• Standard: Standard
• Transport Package: Wood Cases Packing
• Specification: 4000GF
• Trademark: Jichai
• Origin: China
• HS Code: 85022000
• Production Capacity: 100

Product Description

 

4000kW natural gas generating sets (4000GF-T) are powered by model 16V26/32T gas engine. It has the features of accurate voltage regulating, good dynamic performance, less voltage waveform distortion, high efficiency, compact structure, easy to maintain, low speed, good reliability, long life operation and cost-effective.The 26/32 series natural gas engine provided by our company is heavy duty designed, four-stroke cycle, stationary type, water cooled and of the manufacturer's qualified design for continuous operation required. The 26/32 series natural gas engine is exhaust turbine, 16 cylinders, V-type engine.

 

Genset Model	4000GF70-T
Engine Model	16V26/32T
Rated Power	4000KW
Continuous Output	3800KW
Rated Frequency	50Hz
Power Factor	0.8 ( lag )
Rated Voltage	10500V
Rated Speed	1000r/min
Oil Consumption	≤0.5g/kWh
Generator Efficiency	≥40%
Starting Mode	Pneumatic starter
Cooling Mode	High and low temperature circulating water cooling
Operating Mode	Electric control
Connection Model	Elastic coupling
Stabilized Voltage Regulation	≤±2.5%
Voltage Fluctuation	0.3%
Instantaneous Voltage Regulation	-20%~+25%
Voltage Recovery Time	6s
Stabilized Frequency Regulation	≤5% ( adjusting)
Frequency Fluctuation	1.5%
Instantaneous Frequency Regulation	-10%~+12%
Frequency Recovery Time	≤5s
Overall Dimensions	9.4m x 2.9m x 4.17m
Weight	70 tons (detachable, engine weight 45 tons)
Power generation efficiency is based on standard ambient conditions, 97% generator efficiency at rated load.

 

Model	16V 26/32T
Fuel	Natural gas
Type	Four stroke, Multi-point injection of gas, pre-combustion chamber, turbocharging of exhaust gas, inter-cooling of intake air, supercharger arranged at the flywheel end of the engine
No. of Cylinder & Cylinder Arrangement	16 cylinders, V-type
Bore ×Stroke	260mm×320mm
Single Cylinder Displacement	17L
Rated Speed	1000r/min
Rated Power	4200kW
Rated Average Pressure	1.65 Mpa
Gas Supply Pressure	10-12bar
Gas Consumption	≤8500kJ/kWh(4MW@1000rpm)
Lub-oil Consumption	≤0.5 g/kW·h
Exhaust temperature (after turbocharger)	450ºC
Lubrication method	Pressure and splash lubrication
Starting method	Pneumatic starter
Minimum idling stable speed	400 r/min
NOx emissions	500mg/m3 @5%O2
Noise at 1m at rated power	120dB(A)
Dimensions (mm)	6748×2353×3255mm
Weight	45t
Rotation direction	Counterclockwise (viewed from the flywheel side)
Note: The rated power is the effective power of the engine at the rated speed under standard environmental conditions. The calibration gas consumption rate is based on the standard ambient conditions, the methane value is greater than 80. The exhaust back pressure of the exhaust port of the supercharger is not more than 3KPa, and the pressure of the air inlet of the supercharger is not less than -2KPa. The standard environmental conditions are: atmospheric pressure 100kPa, relative humidity 30%, ambient temperature 25ºC, and intercooler inlet water 25ºC.

 

Manufacturer	Leroy Somer or eqivalent
Rated power	4000kW
Rated voltage	10500V
Rated current	274.93A
Rated frequency	50Hz
Rated power factor	0.8( lag )
Rated speed	1000r/min.
Winding connection mode	Y
Insulation grade	H
Acceptable environment temperature	0ºC~40ºC
Altitude	≤1000m
Ventilation mode	Self ventilation(IC01)
Excitation mode	Permanent self-excitation and constant voltage ( AVR)
Rated efficiency	≥95%
Short circuit current capability	300%In
Waveform Distortion Rate THD	≤5%
Telephone harmonic factor THF	≤3%

 

Requirements for Fuel Gas

In order to ensure its reliable and stable operation of the generator set, the requirements for the natural gas quality is as follows:
--Natural gas should be dehydrated without any water, crude oil & clean oil
--Natural gas pressure 100~400kPa
--Natural gas temperature -20~40ºC
--Total sulfur content less than 200mg/m3
Note: Gas volume is under standard condition with 100kPa atmosphere, 20ºC ambient temperature, 30% relative moisture.

Requirements for Cooling Water

Soften water is required by high temp and low temp engine circulation system. Cooling water should be lightly alkaline clean water without any corrosive compound, such as chloride,sulfate or acid etc. The main index requirements are as follows:
 

Hardness	0.7~5.3me/L
Chloride Ion Content	<150mg/L
PH value	7~8.5

Requirements for Lubricant

Engine is equipped with complete lubrication system, with oil consumption≤0.3g/kW·h.
Lubricant model: Mobil Pegasus 705 or 15W40CD.

Requirements for Environment

The Gas Genset can run steadily, reliably, continuously under following condition:
ambient temperature: -40 ºC~+40 ºC
relative moisture: <90 %
sea level elevation: ≤ 2000 m
The generator can output rated power under standard environmental conditions:
atmosphere pressure: 100 kPa
ambient temperature: 25 ºC
air relative moisture: 30 %